MSR165: New datalogger for shock and vibration The robust MSR165 datalogger is capable of making 1600 acceleration (shock, vibrations) measurements per second in all three axes. Shock monitoring is possible up to +/- 15g, 32 measurement values are recorded even before the event takes place. The highest performance in the smallest space!
This waterproof datalogger, in its anodised aluminium case, has extremely low power requirements due to its high-performance 3-axis accelerometer (150 microamperes, 13-bit resolution). Thanks to its rechargeable 900mAh lithium-polymer battery the unit can record shock measurements over a period of six months. The installed memory is capable of storing over two million measurement parameters which is sufficient for over 10,000 shocks. Using an SD card (>4 GB) the memory capacity can also be significantly increased which is particularly useful for recording vibration measurements. All saved measurements can be quickly transferred to a PC or laptop via the USB interface. The basic specification of the MSR165 includes a high resolution 3-axis acceleration sensor. In addition you can also record temperature, humidity, air pressure, light and four analogue input signals. Basic specification and technical data
Housing: Anodised aluminium case, PC, not encapsulated, waterproof (IP67) 39 x 23 x 72 mm, approx. 69 g
Memory capacity: Over 2m measurement parameters, expandable to > 1bn Pushbutton: Set bookmark or start and stop recording
Integrated sensor: 3-axis digital accelerometer (13 Bit resolution)
Working range: ±15 g, -20…+65 °C-20…+65 °C
Accuracy: ±0.15 g (+25 °C)
Sampling rate: up to 1600 /s (±15%)
Power supply: Rechargeable lithium polymer battery 900 mAh. The battery is charged via the USB connection. At a measurement rate of 1600 /s up to once every 12 h, 3-axis acceleration data can be recorded over a period of six months PC software: Free Setup, Reader, Viewer- & Online software (Windows 2000 / XP / Vista / 7)USB
Interface: USB Operating conditions: Temperature -20…+65 °C
Standards: The MSR 165 complies with EU-Directives RoHS/WEEE Measurement parameters for the additional sensors (internal and external) In addition to 3-axis acceleration you can also simultaneously measure temperature, humidity, pressure and/or light using the MSR 165 datalogger. There is a choice between internal and external sensors for these additional measurement parameters. The external sensors are available with cable lengths of 0.15 m, 0.4 m, 1.0 m and 1.6 m. Expanding the memory capacity with an SD memory card On request the MSR 165 can be supplied with an interface for plugging in a standard SD card (one ≥4 GB microSD card is included). Please note that this expansion slot with plugged-in microSD-card only meets the protection category IP60.
|
