MSR 160 Mini Datalogger

 Four integrated analogue inputs, a high measurement rate and its gigantic memory capacity, all packed into a small format are the key characteristics of the new MSR 160 datalogger. The analogue inputs of the robust minilogger can be used for conventional sensors with analogue outputs (e.g. CO2, conductivity, pH etc). In addition, a multiple output switching power supply is also provided.

This highly versatile datalogger has a measurement rate of up to 1000/s. The analogue
measuring instrument can be optionally fitted with additional internal or external temperature, humidity and pressure sensors. With the optional microSD card over one billion measurement parameters can be recorded and saved using the MSR 160. The lightweight device (approx. 80 g) has an anodised aluminium case and a 900 mAh rechargeable lithium polymer battery. All saved data can be rapidly transferred to a PC or laptop via the USB interface. The user-friendly data acquisition and analysis software is supplied free along with the datalogger.

 Basic specification and technical data

Analogue inputs: 4 analogue inputs with freely selectable input. configuration 0…20 mA; 4…20 mA; 0…3.0 V; 0.5…4.5 V; 0…5.0 V; 1.0…6.0 V; 0…10.0 V; 0…12.0 V; 0…24.0 V

Digital Input: Configurable pushbutton functions

Resolution: 12 Bit 1000 /s to every 12 h

Housing: Anodised aluminium case, PC, encapsulated waterproof (IP67), in blue, anthracite. 39 x 23 x 72 mm, approx. 80 g

Memory capacity: Over 2 000 000 measurement parameters – expandable to over 1bn measurement parameters with optional microSD card.

Power supply: Rechargeable lithium polymer battery 900 mAh. The battery is charged via the USB connection

Interface: USB

PC software: Free Setup, Reader, Viewer and Online software (Windows 2000 / XP / Vista / 7) for data acquisition and analysis.

Operating conditions: -20…+65 °C

Compliance: The MSR 160 complies with EU-Directives RoHS/WEEE.

 Measurement parameters of the available sensors (internal and external)

You can specify your MSR 160 with up to four different internal sensors: the options are temperature, humidity, pressure and attitude. If required you can also connect external sensors in place of the internal ones (temperature, humidity or pressure) with the following cable lengths: 0.15 m, 0.4 m, 1.0 m, and 1.6 m (maximum 2 pcs.).

Expanding the memory capacity with a microSD memory card

On request the MSR 160 can be supplied with an interface for plugging in a standard microSD card (one ≥4GB microSD card is included). This allows you to increase the memory capacity of your datalogger to over 1 billion measurement parameters. Please note that this expansion slot with plugged-in microSD-card only meets the protection category IP60.